Move to the text

Musashi 2

Doorcase sewing machine with Musashi two doorcase cutting machine

"Two-sword fencer" who regarded productivity as ... saving of labor ...

●Work efficiency is improved at both doorcases same time by cutting. The operation became easy by the color liquid crystal display panel deployment, too.
 
Improvement ... from - Musashi
●Both severability range became wide.
●The set of the table to a table tension machine smoothened.
●Table of table tension machine clip power largely improved it.
●The boot-time of the color liquid crystal display panel became largely fast.

■Characteristic

The color liquid crystal display panel deployment

●The control panel adopts a color LCD screen. The operation only touches touch panel lightly, and the mode reshuffling touches a screen lightly, too
   The simple operation that I only do.
●As an assembly operation, the trouble are displayed by a message screen, I am reliable at the time of emergency. I can easily use anyone.
Improvement ... from - Musashi
●The boot-time of the color liquid crystal display panel became largely fast.
●Time 1/10 ganinarimashita before becoming available from power supply injection.
 I can perform reset operation (power supply OFF → ON) at the time of the trouble occurrence without stress.
●By the deployment of the high brightness LED, I am superior in visibility.
●As I was superior in dust proofing, waterproofness (IP66F), the durability improved.

Three kinds of confrontation modes of ladder sewing, plover sewing, the flat stitch

●A plover sewing, flat stitch mode of the finish which is beautiful to close the sewing method with a ladder of addition, three kinds sew; is Messe from a method
  I easily come by reshuffling with a the screen.
●I lightly promise the beautiful finish of the rimless tatami using the floor.
Ladder sewing
Plover sewing
Flat stitch, plover sewing

Table tension work is one-touch operation with air raising and lowering of cutting machine, too

●Make raising and lowering of cutting machine the air; work easily. After the floor cutting, a cutting machine automatically jumps up.
●Putting in and out, front of table tension machine tension work is one-touch operation with air, too.
●The tension condition of the table can easily make a fine adjustment by gauge indication freely. In addition, the collective tension is possible depending on the kind of the table, too.
Improvement ... from - Musashi
●Both severability range became wide.
 Both;, as for the sectile greatest dimension, 6 sun of 6 shakus's smallest dimensions are 2 shaku 3 sun five minutes.

Table tension machine, table weight device

●As there were usually table presser bars at the position that happened, it became easy to do table tension work very much.
●The making pin is unnecessary without a table being damaged, and the table weight device is effective for a chemistry list.
●The table tension machine is easily adjustable to the thickness of the tatami mat, too.
●The insertion of the table to a table scissors device smoothened.
 I can insert the main room list in a table scissors device without stress, too.
 As I can set a sewing beginning position at the time of arrival at sewing of the main room list nearer the sewing machine retreat edge, progress edge abnormality at the time of the automatic thread cutting decreases.
 I sandwich it and can regulate the balance of right and left of the condition with the left lever.
Improvement ... from - Musashi
●A table clip power largely improved.
 While a cylinder overwhelms it with two, the table scissors device of "the Musashi -2 type" sandwiches a table. 
 I pick it up with power of conventional approximately 2.3 times by addition and the structure change of the cylinder.
 The adjustment with the tool (spanners) by the thickness of the table became needless.
 I sandwich "a hemp pull list" and "the bigu list" by no adjustment well.

Rotary board device

●As link floor strengthening, and get nervous, is finished without a bend, and, in the case of a floor, the dimensions lightly reach it; and precisely.
●The rotary board is more convenient in top and bottom and the series movement of right and left.
●I add the rotary board position and the dimensions of the tatami mat, and movement is easy.
Improvement ... from - Musashi
●I slimmed a rotary board device.
 I slimmed "a rotary board device" to improve the operability of "the habit collecting steering wheel" in a half tatami mat length dimensions set.
 If "the habit scale" to become the shade in a half tatami mat set lets "an LED lamp" turn on, I see it clearly.

Automatic upper thread, lower thread cut-off

●I automatically cut an upper thread, a lower thread and go back after the confrontation by the adoption of the thread cutting device automatically.
●It is saved an upper thread, the lower thread.

Video

■Fixed ground plan

■Specifications

Full length
3,275mm (8 sun of 10 shakus)
Height
2,120mm (7 shakus)
Width
2,110mm (7 shakus)
Tatami mat stand height
700mm (3 sun of 2 shakus)
Weight
1,230 kg
Motor
 
Sewing machine use
 
Forwarding use
 
It is for cutting
Ministry of three 200V
With 200W 1/10 slowdown machine brakes (nothing)
400W servomotor (nothing)
With 400W brakes (two)
Rating power consumption
1KW
Sewing method
Two thread final sewing
Sewing interval
15-55mm
Compressor
More than 400W (option)
Our website uses cookies to allow us to improve your browing experience.
Select "Agree" to use.If you do not agree, some features cannot be used. About more

I agree

Refuse

Back to TOP